Restore the Windows bootloader to MBR after dual- booting with Linux. If you are reading this, you have likely attempted or actually set up a dual- boot system between your favorite Linux distribution and Windows. And if you did that on a computer with a single hard drive, that is, dual- booting Windows and Linux alongside each other, you probably replaced the Windows boot loader with GRUB, the Linux boot loader, in the Master Boot Record (MBR). Though that is not what I recommend, many still prefer it that way, even as I have written in many of my dual- boot tutorials that Windows will, during a reinstall, overwrite anything it finds in the MBR, and that some anti- virus programs tend to write small files to the MBR, messing up GRUB. For the record, my recommendation is to install the Linux boot loader, not in the MBR, but in the Linux installation’s boot partition, or the main partition, if /boot is not on a separate partition.

Restore the Windows bootloader to MBR after dual- booting with Linux. If you are reading this, you have likely attempted or actually set up a dual- boot system between your favorite Linux distribution and Windows. And if you did that on a computer with a single hard drive, that is, dual- booting Windows and Linux alongside each other, you probably replaced the Windows boot loader with GRUB, the Linux boot loader, in the Master Boot Record (MBR). Though that is not what I recommend, many still prefer it that way, even as I have written in many of my dual- boot tutorials that Windows will, during a reinstall, overwrite anything it finds in the MBR, and that some anti- virus programs tend to write small files to the MBR, messing up GRUB. For the record, my recommendation is to install the Linux boot loader, not in the MBR, but in the Linux installation’s boot partition, or the main partition, if /boot is not on a separate partition.

This gives the Windows boot manager the main responsibility of presenting what operating system to boot into during a restart or reboot. That way, if you have to reinstall Windows, you will not lose access to the Linux side of the dual- boot system. If you installed the Linux boot loader to the MBR and want to restore the Windows boot loader, this short tutorial shows you how to do it. It is an easy, point- and- click process. And the application that makes it that easy is called Easy. BCD, a free- for- personal- use application from Neosmart Technologies.

To download it, go here. The link to download it for free is all the way at the bottom of that page, so scroll down and click on the “Download free for limited, non- commercial use” link. After the download, install it as you would any other Windows application.

Removing a dual boot can be dangerous, and it does not guarantee that Windows will forget about the second boot sector. This is your first step in removing the boot. How to dual boot Linux and Windows - Step by step installation instructions. If you want a PC where you can use both Linux and Windows, a dual boot PC using one hard. This tutorial will help you in: Enabling Windows Vista boot screen in Windows 7; Completely disabling boot. You’ve installed Ubuntu on your PC alongside Windows in a dual-boot arrangement. As a brief explainer, dual-booting is the act of installing two operating systems.

My OS is windows 8.1 and i tried to dual boot using ubuntu 13.10. But i'm having a problem in step 12 where it suppose to say "This computer currently has windows 8.

Easy. BCD’s main view is shown in the screen shot below. To restore Windows 7’s boot loader to the MBR, click on the BCD Deployment tab. Once there, click on the Write MBR button. If you are running Windows XP, select the option under MBR Configuration Options. If successful, a message at the bottom left of the window will say just that.

That was easy, right? But that also means that you have lost GRUB. If you reboot without doing anything else, you will find that there is no way to boot into the Linux side. If you do not want to continue using the Linux installation, then you do not need to do any thing else from Easy.

BCD. You might want to delete the Linux partitions to free up space for use by Windows. If, however, you still want to be able to boot into the Linux installation after restoring the Windows boot manager to the MBR, you need to add an entry for the Linux distribution in the boot manager’s menu. To do that, click on the Add New Entry tab. While there, click on the Linux/BSD tab, then select “GRUB 2” from the “Type” dropdown menu. Modify the “Name” field to reflect the name of your Linux distribution.

Click the Add Entry button. Click Edit Boot Menu tab to see the new entry. Note: Most Linux distributions use GRUB 2 as the boot loader.

If yours uses GRUB Legacy, select it from the same dropdown menu, and be sure to specify what partition it is installed into from the “Device” dropdown menu. You should see two entries. One for Windows 7, the other for the Linux distribution.

You may change the boot order. If you are satisfied with this operation, exit Easy. BCD and reboot the computer.

Windows Boot Genius. Laptop won't boot with blue/black screen of death? Windows crashed and can't access your data? Computer keeps restarting or freezes after login? With Windows 8's Release Preview available and the final version inching toward completion, it's a great time to revisit how to install Windows 8 with a USB drive and. Dual-boot Repair Windows 10 - fix Windows boot manager/loader - Windows 10/8.1/7/Vista/XP and Server 2003/2008/2012 on BIOS and UEFI firmware.

You should see the Windows boot menu that you saw on the first page of this article. This last image was taken from a tutorial written for Chakra. You may read it at How to dual- boot Windows 7 and Chakra Linux Archimedes, with shared NTFS partition at the end. Bonus Info – What do you do, if after setting up a dual- boot system between Windows and Linux you decide that you no longer what to use Linux? Delete the Linux partitions. How? Boot into Windows and start the partition manager (type “partition” into the menu’s search field and click on the result). This screen shot is from a test installation I did.

The Linux partitions are indicated in red. To delete them, right- click on each and select “Delete Volume” from the context menu. That is all you need to do. What if you decide, after playing with Linux for a while, that you like it better than Windows, and want to get rid of Windows? Well, because Windows is sitting at the front part of the hard drive, the best solution is to reinstall your Linux distribution, completely wiping both Windows and the original instance of the Linux distribution from the drive. Before doing it, be sure to back up your data.